Frequently Asked Questions

---

No, at this time there is no slip printer is available to keep the overall cost to build and barrier to ownership down.

No, In keeping with portability and cost effectiveness, this system does not currently include the hardware necessary for speed calculation.

1 x Modular 6 Lamp Stalk with integrated control board

1 x 4 Sensor Stalk Base

1 x Finish Line Ramp and 2 Sensor Combo

1 x Control LCD Box with 1 x bare lead pigtail(custom battery adapters avail upon request) 

2 x Dual Short Range Start Line Reflectors(Stage and Foul for both Left and Right)

2 x High Durability Large Single Finish line Reflectors(Left and Right)

1 x Wireless Activation Remote

1 x 1.5 foot Start Line Sensor Ethernet Cable

1 x 150 foot Finish Line Sensor Ethernet cable with custom spool

1 x 20V MAX DeWalt Power Tool Battery (5Ah recommended for several hours of fun)

1 x 2S-4S battery. An inexpensive LiFePO4 transmitter battery works well for this. We can include a prebuilt adapter if you let us know what battery connection you prefer(XT60, XT90, EC3, EC5, Deans, JST), we can accommodate almost all of them. 

6 Bazillion dollars + Shipping & Handling. Still reading? Oh, ok, good, the actual price will be about $625 for a complete system, Shipping & Handling is additional and calculated once we have a destination zip code. Email us with any questions or if you would like, provide a destination zip code for an estimated shipping quote.

Great Question. We are currently waiting for the weather to warm up here in NJ(and also not be torrential rain) so we will hopefully be out for full scale testing the last week of March 2025. If all goes as planned, we will have systems available for purchase by Mid-April 2025.

Yes. Once the official product launches, we will have additional reflectors and replacement reflector housings available for sale. A good portion of the core electronics are hardcode paired to one another in software so if you need a new remote, control LCD box, or other major part due to damage, reach out to us and we'll work with you to the best of our ability to get you racing again ASAP.

We've designed the system with the hobbyist in mind and we think it'd be ridiculous for you to have to buy a "special" cable from us. So we used standard off-the-shelf Cat 6 ethernet patch cables on both connections. If you need to replace one, just go to your favorite retailer or order one online. Simple.

Short answer, yes. A couple years ago we released a completely wireless full tree  system. While everything worked as intended, the problem with wireless still remained, and that's the fact that everything under the sun is wireless anymore so there's always going to be interference hindering performance. We are currently working on a few different products, and one is the wired full tree. No ETA or full feature set list on that system yet, but you can check out the R&D Lab page for updates.